Complete Workplace, Air/Water Quality, and Product Compliance Measurement
Workplace safety, product compliance, and environmental monitoring programmes each draw on a different measurement discipline — acoustic, air quality, water quality, thermal, and elemental analysis — and rarely from a single supplier or instrument family. This range brings together the portable instrumentation covering that full spread, from occupational noise monitoring through to non-destructive RoHS compliance screening.
On the acoustic side, Class 1 and Class 2 sound level meters, calibrators, and noise dosimeters cover both workplace noise exposure monitoring and product noise emission testing, calibrated to the accuracy class the applicable standard requires. Air and gas monitoring spans particle counters and dust meters for PM2.5/PM10 particulate measurement, gas detectors, and broader ambient air quality equipment, alongside WBGT heat stress monitors and quantitative respirator fit testers for occupational health programmes specifically. Water quality is covered by dedicated pH, conductivity, and dissolved oxygen instruments, used across industrial process monitoring and environmental compliance sampling.
Thermal and radiometric instruments — thermal cameras, blackbody radiation sources for camera calibration, industrial infrared thermometers, and nuclear radiometers — support both predictive maintenance (detecting abnormal heat signatures before failure) and calibration verification work. RoHS and material compliance screening is handled by non-destructive EDXRF analysis, which identifies restricted elements (lead, cadmium, mercury, hexavalent chromium, and others) in a sample without damaging it, making it suitable for incoming goods inspection as well as pre-shipment compliance verification.
Because this range covers genuinely different measurement disciplines, the starting point for selecting equipment is usually the compliance requirement or monitoring programme driving the purchase — occupational health, environmental permit conditions, or product compliance (RoHS, REACH) each point toward a different instrument category within this range.
Class 1 meters offer tighter measurement accuracy and are typically required for precision acoustic testing, product noise certification, or environmental noise compliance work where measurement uncertainty must be minimised. Class 2 meters are suited to general workplace noise monitoring and screening applications where the standard doesn't mandate Class 1 precision.
Energy-dispersive X-ray fluorescence (EDXRF) excites a sample with X-rays and measures the characteristic energy re-emitted by different elements, identifying and quantifying restricted substances without cutting, dissolving, or otherwise altering the sample — making it suitable for screening finished products and components rather than only destructive lab samples.
A blackbody source provides a known, stable, precisely controlled temperature reference, used to calibrate or verify the accuracy of a thermal camera or infrared thermometer against a traceable standard — without it, a thermal imaging instrument's absolute temperature readings can't be independently confirmed as accurate.


| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI Sound Level Meters | Sound level, Class 1 and Class 2 | A 30–130dB; precision, integrating and 1/1–1/3 octave models | IEC 61672 | View |
| MEWOI Sound Level Calibrator | Calibrates sound level meters | 94/114dB SPL | IEC 60942 | View |
| MEWOI Noise Dosimeter | Personal noise exposure | MEWOI1354/1355, BSV6910 (dual-channel), TL2256 | IEC 61252, ISO 9612, OSHA | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI Ambient Air Quality Equipment | Ambient air quality: PM2.5, PM10, CO2, TVOC | — | — | View |
| MEWOI Particle Counter | Airborne particle counts, laser | 3 channels (HPC300) or 6 channels with printer (HPC600) | ISO 14644 | View |
| MEWOI Dust Meter | Dust concentration (mg/m³) and TSP | JY1000, GT1000FC handheld laser meters | — | View |
| MEWOI Multi-Gas Detectors | Toxic, O₂, CO₂, combustible gases, TVOC | 1–8 gases; 0–1ppm to 0–100,000ppm, 100% LEL | — | View |
| MEWOI Laser Methane Remote Detectors | Methane at a distance, 1650nm laser | 0–50,000ppm·m; 15m, 30m or 100m reach | GB 3836.1 | View |
| MEWOI-GT1000 VOC Detector | Total VOCs, PID sensor | 0–10 up to 0–10,000ppm; IP66, Ex d IIC T4 | — | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI UV Light Meter | UV irradiance | SD2040, LS125 with interchangeable probes | — | View |
| MEWOI WBGT Heat Stress Monitor | Heat stress (WBGT index) | — | ISO 7243, ACGIH | View |
| MEWOI Quantitative Respirator Fit Tester | Respirator fit, quantitative | — | OSHA 1910.134, AS/NZS 1715 | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI Nuclear Radiometer | Gamma and X-radiation dose, Geiger counter | RG600, RG1000 with dose alarm | — | View |
| MEWOI Dissolved Oxygen Analyzer | Dissolved oxygen in water | — | — | View |
| MEWOI Conductivity Meter | Conductivity, TDS, salinity | — | — | View |
| MEWOI pH Meters | pH of water and electrolytes | — | — | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI-CW2800 probe thermometer | Contact temperature, probe | −50 to 330°C, ±0.5°C, IP68 | — | View |
| MEWOI Industrial Infrared Thermometer | Non-contact temperature | −50 to 260–2200°C by model; fixed or adjustable emissivity | — | View |
| MEWOI Thermal Cameras | Thermal imaging | 60×60 to 384×288 IR resolution, −20 to 550°C | — | View |
| MEWOI Blackbody Radiation Source | IR thermometer calibration reference | +5 to 50°C or +35 to 50°C, emissivity ≥0.95 | — | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| MEWOI Air Speed Anemometer | Air velocity and temperature | H3; H8 adds airflow volume | — | View |
| MEWOI Night Vision | Low-light imaging | — | — | View |
| CD-626 / CD-628 / CD-630 | Colour and optical density, 45/0 | Φ3–11mm apertures; UV source on CD-628/630 | CIE No.15, ISO 7724-1, ASTM E1164 | View |

| Model | Measures | Range / models | Standard | |
|---|---|---|---|---|
| EDX-2 series | RoHS elements by EDXRF | Si-PIN (149eV) or SDD (129eV, vacuum EDX-2T) | RoHS 2011/65/EU | View |
This range groups portable instruments by use case rather than by measurement discipline, so the right purchase depends on which compliance or monitoring programme is driving it: a Class 1 or Class 2 sound level meter for workplace noise or product noise-emission compliance, air/water quality instruments for environmental monitoring, non-destructive EDXRF units for RoHS element screening in the field rather than on a bench, and thermal cameras or blackbody sources for IR calibration work. Because these instruments serve genuinely separate regulatory purposes, most buyers purchase from this range item-by-item against a specific compliance requirement rather than as a bundled kit.