Programmable AC power sources from Preen, spanning compact bench units to megawatt-scale facility systems for grid simulation, compliance testing, and general R&D.
Programmable AC power sources reproduce the AC grid — voltage, frequency, phase, and waveform — under controlled, repeatable conditions, letting a product be tested against real-world grid variation, disturbances, and international voltage/frequency standards before it ever reaches a live installation. They're used across compliance testing (IEC 61000-4-11/13/34, GB/T harmonics standards), production-line burn-in and functional test, and general R&D bench work where a stable, adjustable AC supply is needed in place of the mains.
Below, Preen's range covers everything from compact bench units to megawatt-scale three-phase systems.





A programmable AC power source lets you test a product on any mains supply in the world, and on supplies that are deliberately imperfect, without changing your building's power. Six questions decide which one you need.
The full guide: how to choose a programmable AC power source.
| Application | What you need |
|---|---|
| Global product compliance | 50 Hz and 60 Hz at each market's voltage, with variation either side |
| Aircraft and avionics | 400 Hz ground power to MIL-STD-704 and DO-160 Section 16/17 |
| Dips and interruptions immunity | IEC 61000-4-11 dips test systems |
| Harmonics immunity | IEC 61000-4-13 harmonics testing |
| Continuous 60 Hz or 400 Hz supply to equipment | Preen AFC frequency converters |
| Inverters, EV chargers, regenerative drives | Regenerative grid simulators |
Comparing Preen's compact ranges? See Preen AFV-S vs AFV-P.
Finch is the authorised Preen distributor for Australia and New Zealand and supplies programmable AC power sources from compact bench units to high-power three-phase systems, with local support from Melbourne.
What is a programmable AC power source?
A test instrument that outputs an adjustable AC supply, with programmable voltage, frequency and waveforms, so products can be tested on any mains supply and on deliberately disturbed supplies.
What is the difference between an AC power source and a frequency converter?
A frequency converter is built to supply a fixed different frequency, such as 60 Hz or 400 Hz, to equipment in continuous use. A programmable AC source is built for testing, with adjustable voltage, frequency and waveforms.
Can I use a variac or isolation transformer instead?
Only for simple voltage adjustment at mains frequency. They cannot change frequency, create dips or harmonics, or measure the output, which compliance testing needs.
When do I need a grid simulator instead of an AC source?
When the product feeds power back, such as a PV inverter, battery inverter, vehicle-to-grid EV charger or regenerative drive. A regenerative grid simulator absorbs that power and returns it to the grid.
Do you supply AC power sources in New Zealand?
Yes. Finch supplies and supports Preen programmable AC power sources across Australia and New Zealand.