ATA-L Series Power Amplifier
Output current monitor 100mV/A, output voltage monitor 10mV/V or 5mV/V depending on model, BNC monitor connectors for oscilloscope
Some test setups need a power amplifier that combines genuinely wide bandwidth with substantial output power and the flexibility to drive both resistive and non-resistive loads — a combination that's harder to achieve than any single specification in isolation. Aigtek's ATA-L Series is built as a wide-band single-channel amplifier capable of high power output, adaptable across the full 0-100% resistive-to-non-resistive load range.
Built-in output current and voltage monitoring — 100mV/A for current and 10mV/V or 5mV/V for voltage, depending on the model — gives a direct, real-time readout of what the amplifier is actually delivering to the load, accessible via a BNC monitor connector for connection to an oscilloscope. This monitoring capability matters for applications where verifying the actual delivered signal, not just the commanded output, is part of the test requirement.
The combination of wide bandwidth, load flexibility, and built-in monitoring makes the ATA-L a practical choice where a test setup needs to both drive a demanding load accurately and independently verify what's actually reaching that load — rather than trusting the amplifier's output setting alone.
