A rack-mount DC bench supply spends most of its life doing unglamorous work — burning in boards overnight, powering a production line test fixture through thousands of cycles, or sitting quietly inside a larger system as the DC rail everything else depends on. Preen's ADC series is built specifically for that role: classic 19-inch rack-mount DC power supplies sized for production-line, burn-in, and integrated-system use rather than one-off bench experiments.
Where the ADC Series Fits
Preen positions the ADC series below the high-power ADG+ and ADG-L programmable ranges, as the workhorse rack-mount option for applications that need a solid, repeatable DC source rather than fast, wide-bandwidth programmability. The three standard models cover 2kW, 4kW, and 8kW, with the 2kW and 4kW units built into a compact 2U chassis and the 8kW model stepping up to 4U — enough headroom in a standard 19-inch cabinet to stack several units alongside test fixtures, controllers, and other rack equipment without eating the whole enclosure.
Output voltage across the range spans from 0-30V up to 0-600V depending on model, which lets a single product family cover everything from low-voltage electronics burn-in to higher-voltage motor and drive testing without switching to a different platform.
Power and Voltage at a Glance
| Model Class | Power | Chassis | Output Voltage Range |
|---|---|---|---|
| ADC 2kW | 2kW | 2U | 0-30V to 0-600V |
| ADC 4kW | 4kW | 2U | 0-30V to 0-600V |
| ADC 8kW | 8kW | 4U | 0-30V to 0-600V |
Scaling Past a Single Unit: Parallel Operation
Production-line and burn-in applications frequently outgrow a single chassis, which is why the ADC series is designed to parallel. Multiple units combine into 18U, 32U, or 42U 19-inch cabinets to deliver anywhere from roughly 24kW up to 64kW from a single integrated system, without redesigning the test setup around a different, purpose-built high-power supply. That matters most in two situations: a burn-in room that needs to scale capacity as product volume grows, and an integrated system build where the DC power stage has to fit a defined rack footprint rather than sprawl across the floor.
Because the paralleled configuration is built from the same 2U/4U building blocks as a standalone unit, maintenance and sparing stay simple — a spare 2kW or 4kW module covers both the standalone deployments and the paralleled cabinet.
Choosing the Right ADC Configuration
For most production and burn-in applications, the sizing question comes down to three things: the voltage the unit under test needs, the total power draw across however many test positions run in parallel, and how much rack space is actually available. A single 2kW or 4kW unit in 2U covers the majority of board- and component-level burn-in work. Where the load is a larger subassembly, a motor, or a multi-position fixture, the 8kW 4U model or a paralleled cabinet configuration keeps the power density manageable without stacking an unreasonable number of standalone chassis.
It's also worth checking the ADC series against Preen's higher-power ADG+ and ADG-L programmable DC ranges before committing — if the application needs fast transient response, wide auto-ranging, or programmability beyond a stable production-line DC rail, one of those platforms may be the better fit. The ADC series earns its place specifically where the requirement is a dependable, rack-mount DC source that scales cleanly with production volume.
Browse our programmable DC power supplies, or see the full range of programmable power supplies supplied and supported in Australia by Finch. New to specifying one? Read our guide on how to choose a programmable DC power supply.