Preen's two programmable DC power supply lines solve the same basic problem — a wide-ranging, precisely controllable DC source — at very different scales and in very different chassis. Picking between the ADG-L and ADG+ series is less about which is "better" and more about matching the physical footprint, power tier, and range-switching behaviour to what the application actually needs.
Two Different Architectures
The ADG-L series is Preen's compact programmable DC supply, built into a 3U chassis and spanning 5kW, 10kW, and 15kW power tiers. Several ADG-L models carry Auto Range output, which lets the unit reallocate its voltage/current envelope on the fly within a single model rather than forcing a choice between separate fixed-range variants — useful when a test program moves between different device voltages without swapping hardware.
The ADG+ series scales up to a different class of application entirely: a high-power, modular platform spanning 30kW, 50kW, 75kW, 100kW, and 300kW tiers, built for production, R&D, and system-level testing where the ADG-L's 3U footprint simply doesn't have the headroom. Each ADG+ power tier is built around its own family of models covering different voltage/current combinations within that power class.
Power Range and Footprint at a Glance
| Series | Power Tiers | Chassis | Auto Range Option |
|---|---|---|---|
| ADG-L | 5kW / 10kW / 15kW | Compact, 3U | Yes, on select models |
| ADG+ | 30kW / 50kW / 75kW / 100kW / 300kW | Modular, high-power rack platform | Model-dependent, by power tier |
When Auto Range Actually Matters
A fixed-range DC supply forces a tradeoff at the design stage: a model tuned for high voltage at moderate current, or high current at moderate voltage, but not both from the same unit. Auto Range ADG-L models remove that tradeoff for applications that move between different device voltages on the same bench — battery module testing across different pack voltages, or a lab that runs several DUTs with different voltage requirements through the same supply without re-provisioning hardware for each one. Where a test program is locked to one voltage/current combination for its lifetime, a fixed-range model is simpler to specify and doesn't cost anything in flexibility that won't be used.
Scaling to Higher Power
Both series support scaling past a single chassis, but the mechanics differ by design intent. The ADG-L's compact 3U format suits benches and smaller test cells where a handful of units side by side covers the requirement. The ADG+'s modular architecture is built from the ground up for scaling into production and system-level test setups — each power tier is designed to sit alongside identical units to build out the total power a larger DUT or multi-position line requires, without the physical footprint of racking dozens of smaller compact units.
Choosing Between ADG-L and ADG+
The decision generally comes down to three questions: how much power the application actually needs, how much rack or bench space is available, and whether voltage/current range flexibility matters more than raw power density. Lab and R&D work under roughly 15kW, especially where bench space is at a premium or the test program spans several device voltages, points toward the ADG-L, particularly an Auto Range model. Production testing, higher-power DUTs, or system-level integration above 30kW is squarely ADG+ territory, with the specific power tier chosen to match the DUT's demand with reasonable headroom rather than running a high-power unit near its ceiling continuously.
Browse our programmable DC power supplies, or see the full range of programmable power supplies supplied and supported in Australia by Finch. New to specifying one? Read our guide on how to choose a programmable DC power supply.