LISUN
Home
/
Electrical Safety Test Equipment

ZBP-T Ball Pressure Test Apparatus (IEC 60884-1) – LISUN

ZBP-T

LISUN ZBP-T ball pressure tester for heat resistance of insulating parts: 5mm ball at 20N, for IEC 60884-1, IEC 60598-1, IEC 60669-1, IEC 61058-1 and 60320-1.

Electrical Safety Test Equipment
Plug, Switch & Cable Test
Test Apparatus
IEC 60884-1:2022 Clauses 25.3 and 25.4; IEC 60598-1:2024 Clause 13.2.1; IEC 61058-1 Clause 21.1; IEC 60669-1:2017 Clause 21; IEC 60320-1:2021 Clause 24.1; GB/T 2099.1-2021; GB 7000.1-2023; GB/T 15092.1-2020; GB 16915.1-2024; GB/T 17465.1-2022
Enquire About This Product
LISUN ZBP-T Ball Pressure Test Apparatus (IEC 60884-1)

Overview

Insulating parts that hold live parts in position must not soften at the temperatures they reach in use. The ball pressure test checks this: a 5mm steel ball is pressed into the sample with 20N at a specified temperature for one hour, the sample is cooled in water, and the indentation must not exceed 2mm in diameter.

The ZBP-T provides the loaded ball and a solid steel support cylinder (50mm diameter, 100mm long). It is placed in a heating oven, such as the LISUN GW-225, until it reaches the test temperature, then the sample is positioned horizontally and the ball applied. After 60 minutes the sample is removed and cooled in water at 20 ±5°C for about 6 minutes, and the indentation is measured within 3 minutes. All parts are plated steel.

Key Specifications

ItemSpecification
BallØ5mm (R2.5mm)
Test force20 ±0.2N
SupportSolid steel cylinder, Ø50 × 100mm
MaterialPlated steel
OvenUse with a heating chamber such as LISUN GW-225

Features

Applications

Frequently asked questions

What is the pass criterion?

The diameter of the impression left by the ball must not exceed 2mm.

What test temperature is used?

The product standard sets it, depending on the part and whether it holds live parts in position.

Related Reading