LISUN
Home
/
Electrical Safety Test Equipment

LS-B77 Vacuum Hose Torsion Tester (IEC 60335-2-2) – LISUN

LS-B77

LISUN LS-B77 vacuum cleaner hose torsion tester to IEC 60335-2-2 Clause 21.104: 5 turns each way at 10rpm, programmable cycles, stepper drive, PLC control.

Electrical Safety Test Equipment
Plug, Switch & Cable Test
Bench-top Tester
IEC 60335-2-2 Clause 21.104; GB/T 4706.7 Clause 21.104
Enquire About This Product

Overview

Vacuum cleaner hoses that contain electrical conductors are twisted repeatedly in use. IEC 60335-2-2 Clause 21.104 tests their resistance to this: one end of the hose is held in a rotating clamp while the rest hangs freely, and it is turned five times one way and five times back at 10 revolutions per minute for 20 cycles, after which the hose must pass an electric strength test.

The LS-B77 automates this test. A stepper motor turns the clamp at a speed set from 0 to 12rpm, and the number of turns in each direction, the rotation angle and the cycle count (up to 32767) are set on a 7-inch colour touch screen with PLC control. When the count is reached the machine stops with an audible and visual alarm. The frame is aluminium profile with painted steel panels, and it is the companion to the LS-B76 hose crush tester.

Key Specifications

ItemSpecification
Supply220V, 50Hz, 200W
ControlPLC with 7-inch colour touch screen
DriveStepper motor
Speed0~12rpm (10rpm standard)
Rotation patternSet turns one way, then reverse (5 + 5 standard)
Rotation angleSet on screen
Cycles0~32767, alarm and stop at end
ClampingTop end held horizontally, hose hanging free, end clamp rotates
FrameAluminium profile and painted steel

Features

Applications

Frequently asked questions

What happens after the torsion test?

The hose is subjected to an electric strength test to confirm its insulation is undamaged.

Related Reading