LISUN CH338 digital torsion meter tests lamp cap torque to IEC 60432-1: 0–10N·m, ≤1% accuracy, both directions, E27/E26, B22d, E14/E12 and G13/G5 clamps.
Enquire About This Product
The CH338 checks the mechanical strength of the joint between a lamp cap and its glass bulb or plastic housing, so a lamp cap cannot twist off in use. It applies and measures torque on screw, bayonet and fluorescent pin caps, in both clockwise and anticlockwise directions, with a programmable upper torque limit alarm.
A built-in microprocessor gives 0 to 10N·m range with accuracy of 1% or better, and results are kept if power is lost. Clamps for E27/E26, B22d, E14/E12 and G13/G5 caps are supplied, and other clamps can be made to order. Lamp manufacturers, test labs and research institutions use it to verify lamp cap torque to IEC 60432-1.
| Specification | CH338 |
|---|---|
| Torque range | 0~10N·m |
| Accuracy | ≤1% |
| Repeatability | ≤0.5%FS |
| Overload capacity | 120%FS |
| Direction | Clockwise and anticlockwise |
| Alarm | Preset upper torque limit |
| Data | Retained after power-off |
| Clamps supplied | E27/E26, B22d, E14/E12, G13/G5 (others to order) |
E27/E26, B22d, E14/E12 and G13/G5 clamps are supplied. LISUN can make clamps for other caps.
Yes, clockwise and anticlockwise.