Home /
This is some text inside of a div block.
Laboratory Power Amplifiers & Signal Sources

ATA-40000 Series High Voltage Power Amplifier

Bandwidth (-3dB) up to DC~1.2MHz, Output voltage up to 310Vp-p (±155Vp), Max output current 8Arms

Some high-voltage loads need substantial current and power as well as voltage. Aigtek's ATA-40000 Series covers this with high-voltage power amplifiers that amplify both AC and DC signals, delivering up to 1314Wp (ATA-40506B) and up to 11.31Ap, 8Arms output current (ATA-41008).

The ATA-41008 delivers 160Vp-p (±80Vp) and 905Wp with bandwidth to 1.2MHz, while the ATA-40506B delivers 310Vp-p (±155Vp) and 1314Wp with bandwidth to 500kHz. Both have N-type outputs, a 1/100 voltage monitor port, and finely adjustable voltage gain and DC bias.

Within Aigtek's range, the ATA-40000 is the higher-power step above the ATA-4000 series (up to 547.1Wp), for loads where current and power, not just voltage, are the limiting factor.

Inquire About This Range →
Aigtek ATA-40000 Series High Voltage Power Amplifier
ATA-40000 Series High Voltage Power Amplifier
Max output voltage 310Vp-p (±155Vp), 1314Wp power, drives high-voltage power loads. Voltage gain and DC bias fine adjustable.
Enquire About This Series →
ModelBandwidth (-3dB)VoltageCurrentPowerOutput 
ATA-41008DC~1.2MHz160Vp-p(±80Vp)11.31Ap905WpSingleEnquire
ATA-40506BDC~500kHz310Vp-p(±155Vp)8.48Ap1314WpSingleEnquire
Model Details
ATA-41008: Introduction, Full Specifications & Datasheet
Product Introduction

The ATA-41008 is a single-channel high-voltage power amplifier capable of amplifying both AC and DC signals, delivering a maximum output of 160Vp-p (±80Vp) and 905Wp to drive high-voltage power loads. Gain is digitally adjustable with one-click saving of common settings, and it is compatible with mainstream signal generators.

LCD Panel DisplayDynamically shows device status and parameters, offering a clear and intuitive interface.
Voltage GainDigitally adjustable x0~x50, with coarse (1 step) and fine (0.1 step) adjustment modes.
InputBNC interface with selectable 50Ω or 100kΩ input impedance.
OutputN-type connector, max output 160Vp-p (±80Vp), max output current 11.31Ap.
Monitoring Port1/100 voltage monitor (BNC) for real-time oscilloscope monitoring of the output voltage.
Specifications
ModelATA-41008
Output TypeSingle-ended Output
Bandwidth (-3dB)DC~1.2MHz
Maximum Output Voltage160Vp-p (±80Vp)
Maximum Output Current4Ap (DC~50Hz)  11.31Ap, 8Arms (>50Hz)
Maximum Output Power905Wp
Fuse10A/250V
Voltage Gainx0~50 (0.1 step/1 step)
Load RL Upper Limit≥19.88Ω (DC~50Hz)  ≥6.95Ω (>50Hz)
Output Impedance0.125Ω + 1μH
Slew Rate≥426V/μs
DC Bias Adjustment±75V (0.1V step/1V step)
Input Impedance50Ω / 100kΩ
Input Amplitude0~10Vp-p MAX
Output Voltage Error≤±3% FS @ 1kHz
Voltage Monitoring100:1 (±5% @ Output, FS)
Total Harmonic Distortion (THD)≤0.1% @ 1kHz, 100Vp-p
Output Voltage Drift≤±0.02V
Ripple≤0.01Vrms
Output InterfaceN-type socket
ProtectionShort Circuit, Over Voltage and Over Temperature Protection
Signal GroundConnected to chassis and power line ground
Others
Power Supply VoltageAC110~240V, 50/60Hz
Operating Temperature0°C~45°C
Storage Temperature-20°C~50°C
Working Humidity≤80% RH, non-condensing
Warranty1 year
Dimensions459×149×604mm (W×H×D)
Full specification table as published by Aigtek. Contact Finch to confirm current specifications before ordering.
Technical Documentation

Download the full technical datasheet for the ATA-41008, published by Aigtek.

⬇ Download Datasheet (PDF) Enquire About ATA-41008 →
ATA-40506B: Introduction, Full Specifications & Datasheet
Product Introduction

The ATA-40506B is a single-channel high-voltage power amplifier capable of amplifying both AC and DC signals, delivering a maximum output of 310Vp-p (±155Vp) and 1314Wp to drive high-voltage power loads. Gain is digitally adjustable with one-click saving of common settings, and it is compatible with mainstream signal generators.

LCD Panel DisplayDynamically shows device status and parameters, offering a clear and intuitive interface.
Voltage GainDigitally adjustable x0~x100, with coarse (1 step) and fine (0.1 step) adjustment modes.
InputBNC interface with selectable 50Ω or 100kΩ input impedance.
OutputN-type connector, max output 310Vp-p (±155Vp), max output current 8.48Ap.
Monitoring Port1/100 voltage monitor (BNC) for real-time oscilloscope monitoring of the output voltage.
Specifications
ModelATA-40506B
Output TypeSingle-ended Output
Bandwidth (-3dB)DC~500kHz
Maximum Output Voltage310Vp-p (±155Vp)
Maximum Output Current3Ap (DC~50Hz)  8.48Ap, 6Arms (>50Hz)
Maximum Output Power1314Wp
Fuse10A/250V
Voltage Gainx0~100 (0.1 step/1 step)
Load RL Upper Limit≥51Ω (DC~50Hz)  ≥18Ω (>50Hz)
Output Impedance0.32Ω + 1.6μH
Slew Rate≥345V/μs
DC Bias Adjustment±150V (0.1V step/1V step)
Input Impedance50Ω / 100kΩ
Input Amplitude0~10Vp-p MAX
Output Voltage Error≤±3% FS @ 1kHz
Voltage Monitoring100:1 (±5% @ Output, FS)
Total Harmonic Distortion (THD)≤0.1% @ 1kHz, 100Vp-p
Output Voltage Drift≤±0.02V
Ripple≤0.01Vrms
Output InterfaceN-type socket
ProtectionShort Circuit, Over Voltage and Over Temperature Protection
Signal GroundConnected to chassis and power line ground
Others
Power Supply VoltageAC110~240V, 50/60Hz
Operating Temperature0°C~45°C
Storage Temperature-20°C~50°C
Working Humidity≤80% RH, non-condensing
Warranty1 year
Dimensions459×325×640mm (W×H×D)
Full specification table as published by Aigtek. Contact Finch to confirm current specifications before ordering.
Technical Documentation

Download the full technical datasheet for the ATA-40506B, published by Aigtek.

⬇ Download Datasheet (PDF) Enquire About ATA-40506B →
Related Series
ATA-400 Series
ATA-400 Series
High-voltage amplifier, up to 310Vpp
ATA-4000 Series
ATA-4000 Series
High-voltage power amplifier, up to 3MHz
ATA-P Series
ATA-P Series
Piezoelectric stack amplifier, up to 1300Wp

Frequently Asked Questions

How does the ATA-40000 compare to the ATA-4000 series?

The ATA-40000 offers substantially more power and current: up to 1314Wp and 11.31Ap, versus up to 547.1Wp and 5.65Ap for the ATA-4000. The ATA-4000 reaches further in bandwidth, up to 3MHz on the ATA-4315, versus up to 1.2MHz for the ATA-40000.

Why does DC bias adjustment matter alongside voltage gain control?

Fine DC bias control lets the output waveform's operating point be shifted independently of its AC gain, which matters for applications where the driven device needs a specific DC offset alongside its AC drive signal — piezoelectric and certain capacitive-load applications commonly need this kind of combined AC/DC control.

What current capability does the ATA-40000 provide?

Above 50Hz the ATA-41008 delivers up to 11.31Ap (8Arms) and the ATA-40506B up to 8.48Ap (6Arms). This matters for loads that draw significant current at high voltage, rather than presenting a purely capacitive, low-current characteristic.

See Aigtek's technical documentation for the ATA-40000 series →

Send an Enquiry →Send an Enquiry →

Related Reading

Laboratory Power Amplifiers & Signal Sources
High-Voltage Dielectric Material Testing — Why Low Frequency Needs Kilovolt-Range Amplifiers
Laboratory Power Amplifiers & Signal Sources
Piezoelectric Ceramic Driving — Matching Voltage, Current, and Bandwidth to Your Actuator

Read: Piezoelectric Ceramic Driving — Matching Voltage, Current, and Bandwidth to Your Actuator