LISUN
Home
/
Environmental Test Chambers

XD Series Xenon Arc Weathering Test Chamber – LISUN

XD-AIR-Xe1/Xe2/Xe3, XD-WAT-Ci3000/4000/4400/5000

LISUN XD xenon arc weathering chambers, air-cooled 1.8kW and water-cooled 4.5–12kW: ISO 4892-2, ASTM G155, SAE J2527, AATCC 16, irradiance and BST control.

Environmental Test Chambers
Xenon Lamp Aging Chamber
Bench-top / Floor-Standing Chamber
ISO 4892-2; ISO 11341; ISO 105-B02; ISO 105-B06; ASTM G155; ASTM G151; ASTM D2565; ASTM D6695; SAE J2527; SAE J2412; AATCC TM16; AATCC TM169; VDA 75202; IEC 60068-2-5
Enquire About This Product
LISUN XD Series Xenon Arc Weathering Test Chamber

Overview

A xenon arc lamp with the right filters reproduces the full spectrum of sunlight, including ultraviolet and visible light. LISUN's XD xenon chambers combine that light with control of temperature, humidity and water spray, cycling the sample through sunlight, heat, spray and darkness. Ageing that takes months or years outdoors, such as fading, colour change, chalking, cracking and loss of strength, can be reproduced in days or weeks.

The chambers are used for coatings, plastics and textiles development, for weathering tests on aluminium composite panels, PV backsheets and waterproofing materials, for automotive interior and exterior parts and safety glass, and by research institutes and test laboratories.

Two families

The XD-AIR range uses air-cooled 1.8kW lamps, from the bench-top XD-AIR-Xe1 to the three-lamp XD-AIR-Xe3. The XD-WAT range uses water-cooled lamps from 4.5kW to 12kW, with exposure areas up to 11,000cm² on a rotating rack, for high throughput and irradiance equivalent to two suns or more.

Irradiance is set and controlled directly and measured by a probe, and a test can end on a set radiant dose in kJ/m². Chamber air temperature and black standard temperature (black panel optional) are controlled directly, humidity is held from 20 to 95%RH, and spray nozzles wet the front and back of the samples. The touchscreen has 14 built-in standard programs, including ISO 4892-2, ISO 105-B06, ISO 11341, ASTM G155, SAE J2527, AATCC 16E and AATCC 169, and lets the user calibrate irradiance, temperature and humidity.

Key Specifications

Air-cooled models

ModelXD-AIR-Xe1XD-AIR-Xe2XD-AIR-Xe3
Lamp1 × 1800W1 × 1800W3 × 1800W
Exposure area980cm²3200cm²3240cm²
Sample capacity17 @ 51 × 102mm31 @ 45 × 132mm55 @ 51 × 102mm
Sample rackFlat, bench-topRotating rackFlat
Size (L × W × H)78 × 98 × 65cm91 × 69 × 166cm91 × 99 × 178cm
Power230V, 20A230V, 25A380V 3-phase, 50A
Irradiance0.25–0.76W/m² at 340nm; 0.50–1.56W/m² at 420nm; 250–765W/m² at 300–800nm

Water-cooled models

ModelXD-WAT-Ci3000XD-WAT-Ci4000XD-WAT-Ci4400XD-WAT-Ci5000
Lamp1 × 4500W1 × 6500W1 × 6500W1 × 12,000W
Exposure area2188cm²6500cm²7700cm²11,000cm²
Sample capacity (145 × 70mm)226577111
Size (L × W × H)84 × 97 × 183cm102 × 127 × 198cm102 × 127 × 198cm130 × 160 × 198cm
Power380V 3-phase, 50A380V 3-phase, 55A380V 3-phase, 60A380V 3-phase, 65A

Common performance

ParameterValue
Lamp life2000h
Chamber air temperatureRoom temperature to 85°C (±2°C)
Black standard temperature40–120°C (±2°C); black panel 40–110°C optional
Humidity20–95%RH (±3%RH)
Water sprayFront and back, 0.12–0.15MPa
Irradiance probe0.1–5000W/m², ±5%
Test endBy time or radiant dose (kJ/m²)

Features

Applications

Frequently asked questions

Air-cooled or water-cooled?

Air-cooled models are simpler and suit most laboratory testing. Water-cooled models give larger exposure areas, higher irradiance and higher sample throughput.

Is the XD-150LS still available?

LISUN's current xenon range is the XD-AIR and XD-WAT series shown here. Tell us your standard and sample size and we will recommend the closest model.

Related Reading