LISUN
Home
/
Environmental Test Chambers

Walk-In Temperature and Humidity Test Chamber – LISUN

GDWJS Series (walk-in)

LISUN walk-in temperature and humidity room, 4000 × 3000 × 2200mm working space: −30 to +120°C, 20–95%RH, ±0.5°C, IEC 60068-2-1, 2-2, 2-30 and 2-78.

Environmental Test Chambers
Temp & Humidity Test Chamber
Walk-In Chamber
IEC 60068-2-1; IEC 60068-2-2; IEC 60068-2-30; IEC 60068-2-78; GJB 150.3A; GJB 150.4A; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2423.4
Enquire About This Product
LISUN Walk-In Temperature and Humidity Test Chamber

Overview

The LISUN walk-in temperature and humidity chamber is a room-sized test space for large products, complete assemblies and batches of samples that will not fit in a cabinet chamber. It runs cold, dry heat and damp heat tests, steady and cyclic, as well as low-temperature storage, for electrical and electronic products, appliances, instruments, plastics and PVC, components, optical fibre, crystals, precision inductors, PCBs and LCDs. Quality control departments, testing bodies, research institutes and universities use it for reliability and quality testing.

The standard working space is 4000mm deep, 3000mm wide and 2200mm high, with a floor rated for at least 600kg. Other sizes can be built.

Construction

The chamber is assembled before delivery from 100mm insulated panels with rigid polyurethane foam. The inside walls, roof and floor are SUS304 stainless steel and the outside is plastic-coated cold-rolled steel. Double doors 2000mm wide and 2000mm high open from inside and outside, with an anti-lock safety device so nobody can be shut in. Each door has a heated, multi-layer glass observation window that clears condensation automatically, and silicone seals with anti-frost heating. Explosion-proof lights inside are switched from the control panel, and a Ø100mm cable port with a silicone plug is provided.

A centrifugal fan blows air down from the top and returns it at the bottom for even temperature without dead spots. Heating is by an independent hot-air system whose power is set automatically by the controller to suit the load, and humidity comes from a stainless steel shallow-tray evaporative humidifier.

Key Specifications

ParameterValue
Working space (D × W × H)4000 × 3000 × 2200mm
External size (D × W × H)4600 × 4200 × 2580mm approx.
Temperature range−30 to +120°C (no load)
Humidity range20–95%RH
Temperature fluctuation±0.5°C
Temperature deviation≤±2°C
Temperature uniformity≤2°C
Heating / cooling rateAbout 0.5°C/min average (no load)
Humidity deviation−3 to +2%RH above 75%RH; ±5%RH at or below 75%RH (with load)
Humidity fluctuation≤±3%RH (with load)
Resolution0.01°C; 0.1%RH
Air speed0.3m/s
Floor loadUniform ≥600kg/m², total ≥1000kg
DoorsDouble, 2000 × 2000mm, 2 observation windows
Timer0–9999h
Noise≤75dB
Power380V, 50Hz

Features

Applications

Frequently asked questions

Can the size be changed?

Yes. Walk-in chambers are built to order, and the working space, temperature range and humidity range can be adapted to your needs.

Is a faster rate of temperature change available?

The standard chamber averages about 0.5°C/min with no load. Ask us if you need faster change rates or heavy heat loads.

Related Reading