LISUN LS-DZF vacuum drying ovens, 91L and 218L: 40–200°C, vacuum to 0.1kPa, ±0.1°C PID control, for ASTM D7227 and general vacuum drying and stability tests.
Enquire About This Product
The LISUN LS-DZF series are vacuum heating and drying ovens with precise temperature and vacuum control. Drying under vacuum lowers the boiling point of moisture and solvents and keeps oxygen away from the sample, so materials dry faster and without oxidation. LISUN states drying time is cut by more than half compared with a conventional vacuum oven.
Uses include vacuum drying, stability testing, raw material and packaging tests, and product life tests for electronics, electromechanical products, medicine and machinery. The ovens also suit ASTM D7227, the rapid vacuum drying of compacted asphalt specimens.
The working chamber is smooth stainless steel; the outer case is cold-rolled steel with an electrostatic powder coat, insulated with high-temperature glass wool. The door seal is a one-piece silicone rubber moulding with adjustable closing pressure to hold a high vacuum, and a bullet-resistant glass window lets you see the samples. The chamber can be filled with inert gas.
A digital PID controller with self-tuning reads a stainless-sheathed Pt100 sensor. It has an over-temperature alarm and a timer that switches off the heating at the end of the set time. A vacuum pump is included.
| Model | LS-DZF6090 | LS-DZF6210 |
|---|---|---|
| Volume | 91.13L | 218.4L |
| Working chamber (D × W × H) | 450 × 450 × 450mm | 600 × 560 × 650mm |
| External size | 640 × 615 × 1290mm | 725 × 730 × 1455mm |
| Shelves | 2 | 2 |
| Total power | 1.3kW | 1.8kW |
| Temperature range | 40–200°C | |
| Vacuum | 101 to 0.1kPa (760 to 1 Torr) | |
| Control accuracy | ±0.1°C | |
| Temperature fluctuation | ±1°C | |
| Heating rate | 3°C/min average | |
| Timer | 1–9999min | |
Yes. The chamber can be filled with inert gas for oxygen-free drying.
Yes, one vacuum pump is supplied.