LISUN IS-*M Ulbricht integrating spheres with BaSO4 coating (PTFE optional), ρ≥0.96, for 4π and 2π flux and colour measurement of LEDs and lamps.
Enquire About This Product
An integrating sphere, or Ulbricht sphere, collects all the light from a lamp so that a spectroradiometer can measure its total luminous flux, chromaticity coordinates, CCT, dominant and peak wavelength. The IS-*M is LISUN's traditional sphere design. LISUN now builds its spheres with the A-Molding process instead (the IS-*MA range), which gives a rounder sphere and better accuracy, so new systems are normally quoted with IS-*MA spheres.
The spheres are coated with BaSO4 (PTFE optional) to CIE 84, with reflectance of at least 0.96 from 450nm to 800nm. They include E27 and T5/T8/T12 jigs, a holder base for LED luminaires, built-in power connections, an auxiliary lamp position, two detector ports, a fibre port and a temperature sensor port, plus a cross laser on spheres over 1m.
Keep the sphere closed when not in use to keep dust out, and blow dust from the coating with a hair dryer or compressed air at least weekly without touching the surface. If the system is used often, LISUN recommends calibrating it with a valid standard lamp every week.
| Specification | IS-*M series |
|---|---|
| Coating | BaSO4 to CIE Pub. No. 84 (1989); PTFE optional |
| Spectral reflectance | ρ(λ) ≥0.96 (450~800nm); ρ(λ) ≥0.92 (380~450nm) |
| Diffuse reflectance | ρ≈0.8, accuracy of ρ(λ) <1.5% |
| Sample mounting | E27, T5/T8/T12 jigs and LED luminaire holder base; up or down orientation |
| Built-in | Power cable and socket, auxiliary lamp position, 2 detector ports, 1 fibre port, temperature sensor hole |
| Alignment | Cross laser (spheres larger than 1m) |
| Model | Typical samples | Luminous flux range |
|---|---|---|
| IS-0.3M / IS-0.5M | LEDs, LED modules, mini LED bulbs | 0.001~1,999 lm |
| 1.0m sphere | CFL and LED bulbs | 0.1~199,990 lm |
| 1.5m / 1.75m sphere | LED bulbs and tubes, fluorescent lamps, CCFL | 0.1~1,999,900 lm |
| 2.0m sphere | HID and high-power lamps | 0.1~1,999,900 lm |
LISUN has moved to the A-Molding IS-*MA spheres, which are rounder and more accurate. Ask Finch for an IS-*MA quote unless you need to match an existing IS-*M setup.
LISUN recommends calibrating with a valid standard lamp weekly if the system is used often, or before use if it has been idle.