LISUN SG61000-5-TVS surge generator for testing TVS diodes and clamping components: 1.2/50μs and 8/20μs, 2V to 1000V, 1A to 500A, 2/12/40Ω outputs.
Enquire About This Product
TVS diodes and other clamping components protect circuits from surges, so they must themselves survive repeated surge currents. The SG61000-5-TVS simulates the high-energy transients from lightning and from switching large inductive or capacitive loads, and is designed specifically to test how much surge current these components can take.
It produces the combination wave of IEC 61000-4-5 (1.2/50μs voltage, 8/20μs current) at low voltages from 2V to 1000V and currents from 1A to 500A, which suits component-level testing. Built-in voltage and current attenuators let you view the waveform directly on an oscilloscope. A programmable high-voltage supply with overvoltage, overcurrent and short-circuit protection keeps testing safe, and an Android touch screen runs the tests.
| Item | Specification |
|---|---|
| Waveform | Open-circuit voltage 1.2/50μs ±30%; short-circuit current 8/20μs ±20% |
| Output voltage | 2~1000V ±10% |
| Output current | 1~500A |
| Output impedance | 2Ω, 12Ω and 40Ω |
| Polarity | Positive, negative, automatic |
| Surge count | 1~9,999 |
| Interval | 5~9,999s |
| Coupling | Capacitor/inductor; capacitor/diode; diode/inductor; diode/diode |
Standard EMC surge generators start at a few hundred volts and are built to test finished products. The SG61000-5-TVS works down to 2V with fine control, which component testing needs.
Connect an oscilloscope to the built-in voltage and current attenuator outputs.