LISUN
Home
/
Electrical Safety Test Equipment

Reel Test Device for Thin Insulation (IEC 62368-1) – LISUN

Reel Test Device

LISUN reel test device for dielectric strength of thin sheet insulation under tension, to IEC 62368-1 Figs 25-28, IEC 61347-1 Annex N and IEC 61558-1.

Electrical Safety Test Equipment
Dielectric Strength Test Accessory
Test Fixture
IEC 62368-1; IEC 61347-1:2017 Annex N; IEC 61558-1:2017; IEC 60065 (8.22); IEC 60950-1 (4.2.6); GB 4943.1-2022; GB/T 19510.1-2023; GB/T 19212.1-2016
Enquire About This Product
LISUN Reel Test Device for Thin Insulation (IEC 62368-1)

Overview

Thin sheet insulation, such as the layers of tape or film used inside power supplies and transformers, must keep its electric strength when it is pulled tight over a sharp edge. Safety standards test this by wrapping the material over a metal mandrel under a set tension and then applying a dielectric strength test.

The LISUN reel test device provides the mandrel and weights specified in IEC 62368-1 (Figures 25 to 28), IEC 61347-1 Annex N, IEC 60065 Clause 8.22 and IEC 60950-1 Clause 4.2.6. It is built from aluminium alloy and steel, and its weight set gives a 50N primary weight that combines to 100N or 150N, plus two 1N weights. It is used with a hipot tester such as LISUN's WB2671B or HIPOT10 series to apply the test voltage.

Key Specifications

ItemSpecification
ConstructionAluminium alloy and steel
Weights50N primary weight; pairs to make 100N and 150N; two 1N weights
Mandrel and fixturesTo IEC 62368-1 Figures 25, 26, 27 and 28

Features

Applications

Frequently asked questions

Does it include a hipot tester?

No. It provides the mechanical fixture; the test voltage is applied with a separate hipot tester.

Which standards use the reel test?

IEC 62368-1, IEC 61347-1 Annex N, IEC 61558-1 and the older IEC 60065 and IEC 60950-1.

Related Reading