LISUN LSP-EMC programmable AC/DC sources, 500VA to 6kVA, 15–1000Hz, harmonics and interharmonics to 2.4kHz, for IEC 61000-4-11, 4-13, 4-14 and 4-28 tests.
Enquire About This Product
The LSP-EMC series are programmable AC/DC test power supplies using SPWM, DSP and high-power switching technology. They provide AC, DC and AC+DC outputs for AC, DC and rectifier loads, and can simulate supply disturbances such as surges, sags, short circuits and fluctuations, as well as distorted waveforms with harmonics and interharmonics up to 2.4kHz.
Programmable waveforms cover the tests of IEC 61000-4-11 (dips and interruptions), IEC 61000-4-13 (harmonics and interharmonics), IEC 61000-4-14 (voltage fluctuations) and IEC 61000-4-28 (frequency variation), making the LSP-EMC a strong pre-compliance tool. With programmable output impedance and a power analyzer, it also supports IEC 61000-3-2 and 61000-3-3 harmonic and flicker testing.
Built-in DSP measurement reads Vrms, Irms, power, frequency, PF, crest factor and current harmonics to the 40th, so the source also works as a power analyzer. Its high peak current capability (see table) suits inrush current testing, with programmable switch-on and switch-off angles. Applications range from commercial products and power electronics to avionics and military equipment.
| Specification | LSP-EMC500VA | LSP-EMC1KVA | LSP-EMC2KVA | LSP-EMC4KVA | LSP-EMC6KVA |
|---|---|---|---|---|---|
| Input | Single phase 90~250V | Three phase 198~250V (phase to phase) | |||
| AC output | 500VA | 1000VA | 2000VA | 4000VA | 6000VA |
| AC voltage | 0~175V / 0~350V, auto range; accuracy 0.2% + 0.2% FS | ||||
| AC current (0~175V) | 5A | 10A | 20A | 40A | 60A |
| AC current (0~350V) | 2.5A | 5A | 10A | 20A | 30A |
| Peak current (0~175V) | 20A | 40A | 80A | 160A | 240A |
| Frequency | 15~1000Hz, 0.001Hz resolution, 0.15% accuracy | ||||
| Distortion | 0.3% at 50/60Hz; 1% at 15~1000Hz | ||||
| DC output | 250W | 500W | 1000W | 2000W | 3000W |
| DC voltage | ±247.5V / ±495V | ||||
| Harmonic simulation | 2nd~40th, harmonic and interharmonic bandwidth 2400Hz | ||||
| Programmable output impedance | 0Ω + 0μH ~ 1Ω + 1mH | ||||
| Programming modes | Pulse, step, sequence | ||||
| Measurement | V, I, peak I, W, PF, CF, harmonics to 40th; current accuracy 0.4% + 0.6% FS | ||||
| Interfaces | RS232 standard; RS485, GPIB, Ethernet optional | ||||
| Weight | ≤21kg | ≤40kg | |||
For pre-compliance, yes: it covers IEC 61000-4-11 waveforms. For full three-phase IEC 61000-4-34 testing, see LISUN's CSS61000-11T.
Yes. It measures voltage, current, power, PF, crest factor and harmonics to the 40th.