LISUN
Home
/
Environmental Test Chambers

LS-B48 Oxygen Bomb and Air Bomb Aging Chamber – LISUN

LS-B48

LISUN LS-B48 pressure ageing chamber for rubber and cable compounds: air bomb at 127°C/0.55MPa, oxygen bomb at 70°C/2.1MPa, IEC 60811-1-2, IEC 60335-1.

Environmental Test Chambers
Aging Test Chamber
Floor-Standing Test Chamber
IEC 60811-1-2:2014 Clauses 8.2 and 8.3; IEC 60335-1:2023 Clause 22.32; IEC 60245-1; GB/T 2951.12-2021; GB/T 4706.1-2023; GB/T 5013.1-2018
Enquire About This Product
LISUN LS-B48 Oxygen Bomb and Air Bomb Aging Chamber

Overview

The LISUN LS-B48 performs accelerated ageing of rubber and other polymer materials in pressurised air or oxygen. It is used for cable insulation and sheaths, rubber parts in appliances, artificial leather and medical device materials, and supports the air bomb and oxygen bomb tests of IEC 60811-1-2 (Clauses 8.2 and 8.3), the rubber ageing test of IEC 60335-1 Clause 22.32, and IEC 60245-1 for rubber-insulated cables.

Raising the temperature and the gas pressure speeds up oxidation, so ageing that would take years in service shows up in days. The test pieces are then checked for changes in tensile strength and elongation.

Test conditions

Temperature and pressure are controlled automatically. At the end of the test the chamber releases pressure gradually over at least 5 minutes back to atmospheric, as the standards require, so the samples are not damaged by sudden decompression. The customer supplies the compressed air and oxygen.

Key Specifications

ParameterValue
Working pressure≤2.5MPa
Pressure display accuracy0.02MPa
Temperature rangeRoom temperature to 150°C, automatic control
Temperature deviation±0.5°C
Pressure vessel volume≥4000cm³
Pressure releaseAutomatic, gradual, not less than 5 minutes
Timer0.01s to 999.9h, settable
Cabinet size840 × 420 × 880mm
PowerAC 220–240V, 50/60Hz
Gas supplyCompressed air and oxygen (≥97%), supplied by the user

Features

Applications

Frequently asked questions

Is oxygen supplied with the chamber?

No. The user provides compressed air and oxygen of at least 97% purity.

Why release pressure slowly?

Sudden decompression can blister or crack the test pieces. The standards call for gradual release, which the LS-B48 does automatically.

Related Reading