LISUN OSP digital oscilloscopes: 2 or 4 channels, 100MHz to 300MHz bandwidth, 1 to 2.5GSa/s, 8-bit or 14-bit vertical resolution, 7 or 8-inch screen.
Enquire About This Product
The OSP series are general-purpose digital storage oscilloscopes for testing all kinds of electronic products, built from high-accuracy components and modules. The range runs from the two-channel 100MHz OSP1102 with a 7-inch screen to four-channel 200MHz models, with a choice of standard 8-bit or high-resolution 14-bit acquisition.
In LISUN test systems they are used to view and verify waveforms such as surge and switching transients. The OSP3104ET version can measure I²t and is used to calibrate the LISUN SBLL-3P20A tester for switches intended for self-ballasted lamp loads.
| Model | Channels | Bandwidth | Sample rate | Vertical resolution | Screen |
|---|---|---|---|---|---|
| OSP1102 | 2 | 100MHz | 1GSa/s | 8 bits | 7 inch |
| OSP3202E | 2 | 200MHz | 1GSa/s | 8 bits | 8 inch |
| OSP3302 | 2 | 300MHz | 2.5GSa/s | 8 bits | 8 inch |
| OSP3202A | 2 | 200MHz | 2.5GSa/s | 14 bits | 8 inch |
| OSP3104E | 4 | 100MHz | 1GSa/s | 8 bits | 8 inch |
| OSP3104AE | 4 | 100MHz | 1GSa/s | 14 bits | 8 inch |
| OSP3204E | 4 | 200MHz | 1GSa/s | 8 bits | 8 inch |
| OSP3204AE | 4 | 200MHz | 1GSa/s | 14 bits | 8 inch |
For most bench work the two-channel OSP1102 is enough. Choose a four-channel model for three-phase or multi-signal work, and a 14-bit "A" model when you need to see small signals on a large one.
It adds I²t measurement and is used to calibrate LISUN's SBLL-3P20A self-ballasted load switch tester.