LISUN ESD-RPB corona electret system for meltblown filter fabric: 30kV/5mA or 60kV/2.5mA DC supply, pin-type corona bars and racks from 800 to 2000mm wide.
Enquire About This Product
The LISUN ESD-RPB charges meltblown non-woven fabric by corona discharge so that it holds an electrostatic (electret) charge. Plain meltblown polypropylene typically filters well under 70% of fine particles by mechanical action alone; once it carries an electret charge, a thin layer can reach the filtration efficiency needed for masks and air filters while keeping breathing resistance low.
The system has three parts: a high-voltage DC power supply, one or more pin-type corona electrostatic bars (ESD-BAR) and a stainless-steel rack (ESD-RACK) that guides the fabric over the bars on alumina rollers. It is installed on the meltblown line before the winder.
A high voltage, typically between 5 and 60kV, is applied to a row of tungsten needles above the fabric. The air at each needle tip ionises, and the electric field drives the ions onto the moving fibre web. Some of the charge is trapped in the fibres, particularly when the polypropylene contains an electret masterbatch such as tourmaline, which helps the charge last. LISUN's bar design includes anti-arcing and current-stabilising circuits so every needle delivers an even current.
The supply is available in positive and negative polarity versions, and bars and racks can be made longer to suit wider fabric.
| Model | ESD-RPB30KV | ESD-RPB60KV |
|---|---|---|
| Input | 220V 50Hz (120V 60Hz available) | |
| Output | 30kV / 5mA | 60kV / 2.5mA |
| Polarity | Positive: ESD-RPB30KV; negative: ESD-RPB30KVM | Positive: ESD-RPB60KV; negative: ESD-RPB60KVM |
| Outputs | 1 (more on request) | |
| Dimensions | 30 × 17 × 36 cm (L × H × D) | |
| Weight | 12 kg | |
| Model | Effective width | Bar actual length |
|---|---|---|
| ESD-BAR800 / ESD-RACK800 | 800mm | 900mm |
| ESD-BAR1200 / ESD-RACK1200 | 1200mm | 1300mm |
| ESD-BAR1600 / ESD-RACK1600 | 1600mm | 1700mm |
| ESD-BAR2000 / ESD-RACK2000 | 2000mm | 2100mm |
Bars use tungsten needles. Longer bars and racks can be made to match the fabric width. One rack supports up to four electret generators working together.
No. It charges the fabric. Filtration efficiency is measured separately, for example with the LISUN GLE-20 PFE tester.
Yes. ESD-BAR bars and ESD-RACK racks are available separately in the standard widths or made to length.