LISUN LS8280 two-channel pink noise generator for IEC 62368-1 Annex E and IEC 60065 amplifier tests: filtered pink noise, 1kHz sine, 1Hz-70kHz, PC control.
Enquire About This Product
Safety tests on audio amplifiers, such as heating and electrical energy source classification, are run with the amplifier driven by a standard signal. IEC 62368-1 Annex E specifies filtered pink noise and a 1kHz sine wave for this, as IEC 60065 did before it.
The LS8280 is a two-channel signal generator controlled from a supplied computer. It produces pink noise to IEC 62368-1 Annex E.2.1 and IEC 60065, sine signals to Annex E.2.2, and also swept sine, sine bursts, white noise and narrowband noise. The two channels can run independently or together, with 0° or 90° phase difference, for testing multi-channel amplifiers. The output covers 1Hz to 70kHz within ±0.2dB.
| Level | 1kHz sine | Filtered pink noise |
|---|---|---|
| Low | 0~100mV | 0~35mV rms |
| Medium | 0~1V | 0~350mV rms |
| High | 0~5V | 0~1.7V rms |
| Item | Specification |
|---|---|
| Frequency range | 1Hz~70kHz, ±0.2dB |
| Channels | 2, independent or synchronised |
| Phase | 0° or 90° between channels |
| Signals | Pink noise, sine, swept sine, swept amplitude, bursts, white and narrowband noise |
| Connectors | BNC; RJ45 (100M) to the control PC |
| Supplied | Generator, software and computer |
Pink noise has equal energy per octave, much like music, so it loads an amplifier in a way that represents real use. The standard filters it to a defined spectrum.