LISUN LS-B65 water evaporation frosting device to IEC 60335-2-24 Clause 11.102 and Annex BB: about 2 g/h at 4W, for refrigerator defrost system tests.
Enquire About This Product
IEC 60335-2-24 requires refrigerating appliances to be tested with frost built up on the evaporator, so that the defrost system's heating is checked under realistic conditions. Annex BB describes a device that slowly evaporates a measured amount of water inside the closed cabinet to create that frost.
The LS-B65 follows the Annex BB design (Figures BB.1 and BB.2): an insulating block with a vertical central hole, an evaporating dish with a high-conductivity base and low-conductivity walls, and a controllable heat source that evaporates the water while adding as little extra heat to the cabinet as possible. It is placed at the geometric centre of the cabinet and connected externally, so voltage can be adjusted and power measured with the door closed. Water is added at intervals through a small-bore tube, at the standard rate of 2 g per litre of gross volume per week; for example, a 140 L cabinet defrosted twice a week receives 140 g.
| Item | Specification |
|---|---|
| Design | To IEC 60335-2-24 Figures BB.1 and BB.2 |
| Heat source | Built-in, adjustable power |
| Evaporation rate | Up to about 2 g/h at 4W input |
| Water supply | Small-bore tube, interval filling; 2 g per litre per week |
| Mounting | Geometric centre of the cabinet, external electrical connection |
| Records | Power, water volume and evaporation time |
2 g per litre of cabinet gross volume per week, divided by the number of defrost cycles. A 140 L cabinet defrosted twice a week receives 140 g.
It builds frost in a controlled, repeatable way without changing the cabinet temperature or adding uncontrolled moisture.