LISUN UV lamp test system: LMS-9000CUV 200–400nm spectroradiometer, UV dark chamber, quartz fibre and deuterium standard lamp for UVA, UVB and UVC.
Enquire About This Product
The LPCE-2 (LMS-9000CUV) is a dedicated test platform for ultraviolet light sources. It is built around the LMS-9000CUV spectroradiometer (200–400nm) and adds a UV-shielded dark chamber, quartz UV optical fibre, UV sample fixtures and a deuterium UV standard lamp with its own power supply for calibration.
It measures the spectral, radiometric and electrical performance of UVA, UVB and UVC sources, with results reported against relevant UV light source standards. Typical users test UV disinfection lamps, UV curing light sources and UV LEDs in R&D, factory quality control and calibration labs.
| Component | LPCE-2 (LMS-9000CUV) |
|---|---|
| UV spectroradiometer | LMS-9000CUV, 200–400nm, for UV spectrum, radiant power and peak wavelength |
| Quartz UV optical fibre | CFS-1.5M, 1.5m quartz fibre for high UV transmission between dark box and spectroradiometer |
| UV test dark chamber | CASE-UV036, inner chamber 60×60×100cm, light-tight |
| UV LED fixture | CLAMP-2B for SMD and through-hole UV sources, with adjustable rail for different test distances |
| UV standard lamp | SLS-UV deuterium lamp with dedicated power supply, for UV spectral calibration |
| Reports | UVA, UVB and UVC spectral irradiance test reports in PDF |
| Software | English and Chinese; Windows 7/8/10/11 |
Yes. It reports UVC band irradiance and spectral distribution, and LISUN lists GB/T 16855-2017 (UV disinfection lamp performance) among its standards.
Standard glass fibres absorb strongly in the UV. The CFS-1.5M quartz fibre carries UV light to the spectroradiometer with much lower loss.