LISUN LIS-OFFSET-D ground reference and supply offset simulators to ISO 16750-2:2023 Clause 4.8: dual ±5V channels, 10A to 200A, DC to 100kHz, four-quadrant.
Enquire About This Product
In a vehicle, components are powered and grounded at different points, so their supply and ground potentials can differ by several volts. ISO 16750-2:2023 Clause 4.8 tests whether components keep working with these offsets.
The LIS-OFFSET-D series has two independent four-quadrant bipolar programmable supplies. One applies an offset to the device's supply line and the other to its ground line, recreating the potential differences found in a real vehicle with several supplies and grounds. It works with 12V, 24V, 36V and 48V systems, offers constant voltage and constant current modes, and is part of LISUN's LS-ISO16750 system.
| Specification | D10A | D20A | D50A | D100A | D200A |
|---|---|---|---|---|---|
| Voltage range | 0~±5V | ||||
| Current range | 0~10A | 0~20A | 0~50A | 0~100A | 0~200A |
| Channels | Two independent programmable supplies | ||||
| Voltage / current accuracy | 0.1% FS / 0.5% FS | ||||
| Setting resolution | 1mV | ||||
| Frequency | DC~100kHz | ||||
| Voltage rise rate | ≥5V/μs | ||||
| Transient current | 3× continuous for 10~200ms | ||||
| Waveform editing | Up to 255 steps, min 100μs per step | ||||
| Protection | Over-current, over-voltage, short circuit, over-temperature | ||||
| Control | 10.1-inch Android touch screen, PC software; LAN, USB, RS485 | ||||
| Calibration | ISO 17025 CNAS certificate | ||||
ISO 16750-2 applies offsets to both the supply and the ground of the component, so two independent supplies are needed to recreate real vehicle conditions.
Pick a rating above the current your component draws through its supply and ground pins.