LISUN LS2736/LS2737 ferrite and iron core testers: induced voltage at 50/60Hz to 1μV resolution, test current to 300mA, 500mA or 10A, 14-bin sorting.
Enquire About This Product
The quality of a ferrite or iron core can be checked quickly by driving a single-turn winding through it at its working frequency and current and measuring the induced voltage. The LS2736 and LS2737 series, also called voltmeter-ammeter characteristic testers, do this for core sorting equipment, and can also serve as a general AC constant current source or AC millivoltmeter with 1μV resolution.
They offer both true RMS mode, which stays accurate on distorted waveforms, and traditional average mode for comparison with older data. Measurement is fast and stable, with up to 40 readings per second, a 14-bin comparator, and Handler, RS232C, USB and optional GPIB interfaces for automated lines.
| Specification | LS2736 | LS2736-05 | LS2737-10 |
|---|---|---|---|
| Test frequency | 50Hz, 60Hz | ||
| Waveforms | Sine | Sine, half wave, full wave | |
| Measuring range | 1μV~500mV | 1μV~800mV | 10μV~1.0V |
| Test current | 1~300mA, 1% | 1~500mA, 1% | 1mA~10A, 1% |
| Voltage accuracy | 1% (±3μV) | 1% (±10μV) | |
| Speed | About 40 / 20 / 6 readings per second | ||
| Comparator | BIN1~BIN14, HI, LOW, PASS, FAIL, buzzer | ||
| Trigger | Internal, manual, automatic, external, bus | ||
| Interfaces | GPIB optional, RS232C, USB host, USB device, Handler | ||
| Memory | 50 internal, 500 on USB drive | ||
| Supply | 100~242VAC, 46~64Hz, >85VA | ||
| Size / weight | 216×87×300mm / 3.2kg | 310×110×315mm / 4.5kg | 400×130×450mm / 10kg |
Choose by the test current your cores need: up to 300mA (LS2736), 500mA (LS2736-05) or 10A (LS2737-10).
Core saturation distorts the waveform, and an average-reading meter then gives the wrong answer. True RMS mode stays accurate.