LISUN GLE-20 oil and salt PFE tester for face masks and filter media: NaCl and oil aerosols, 10–100 L/min, filtration efficiency and airflow resistance.
Enquire About This Product
The LISUN GLE-20 measures the particulate filtration efficiency (PFE) of face masks, respirators and flat filter media, and the resistance the sample presents to a constant airflow. It is used by mask manufacturers, textile and PPE test laboratories, medical device inspection centres and hospitals.
The GLE-20 is an oil-and-salt two-in-one system. It has two completely independent aerosol paths: a salt (NaCl) aerosol generator for KN-type filter elements and an oil aerosol generator (DOP, or equivalents such as DEHS or paraffin oil) for KP-type elements. Because the two hardware sets are separate, an oil test does not contaminate a salt test and vice versa.
Aerosol is drawn through a 100 cm² test area of the sample at a set flow rate between 10 and 100 L/min. Particle concentration sensors measure upstream and downstream concentrations, and the system calculates filtration efficiency while a differential pressure sensor (0–1000 Pa) records breathing resistance. Salt particles have a count median diameter of 0.075 ±0.02 µm and oil particles 0.185 ±0.02 µm, as the respirator test standards specify.
Testing, data storage and reporting run from a touch-screen computer. Results can be exported, printed on A4 or on a small receipt printer, and reports can be printed in English.
| Parameter | Value |
|---|---|
| Flow range | 10–100 L/min, accuracy class 2.5 |
| Filtration efficiency range | 0.001–99.999% |
| Sampling frequency | 1–9999 times/min, settable |
| Particle concentration range | 0.001–200 mg/m³ |
| Differential pressure range | 0–1000 Pa |
| Salt particle CMD | 0.075 ±0.02 µm, geometric standard deviation ≤1.86 |
| Oil particle CMD | 0.185 ±0.02 µm, geometric standard deviation ≤1.60 |
| Aerosol concentration | NaCl 12–20 mg/m³; DOP 50–200 mg/m³ |
| Test area | 100 cm² |
| Aerosols | NaCl; DOP, DEHS, paraffin oil or corn oil optional |
| Ambient monitoring | Built-in temperature and humidity sensor |
| Power supply | AC 220V 50Hz (120V 60Hz available) |
| Class | NaCl aerosol | Oil aerosol |
|---|---|---|
| KN90 / KN95 / KN100 | 90.0% / 95.0% / 99.97% | – |
| KP90 / KP95 / KP100 | – | 90.0% / 95.0% / 99.97% |
Filters rated for non-oily particles (KN, N, most FFP tests) are tested with NaCl, while filters rated for oily particles (KP, R, P) must also pass an oil aerosol test. The GLE-20 does both without cross-contamination.
Yes. The 100 cm² test area holds a flat sample of mask or filter material; finished masks can be tested with a suitable fixture.