LISUN ESD-BAR tungsten-needle corona bars for meltblown electret charging, 800 to 2000mm effective width, used with the ESD-RPB high-voltage supply.
Enquire About This Product
The ESD-BAR series are the pin-type corona electrostatic bars used in the LISUN ESD-RPB meltblown electret system. Each bar carries a row of tungsten needles. Powered by the ESD-RPB 30kV or 60kV supply, the needles ionise the air and deposit charge onto meltblown fabric as it passes, turning it into an electret filter material with much higher filtration efficiency.
The internal circuit of each bar prevents arcing and stabilises current so that every needle delivers an even charge across the full width of the fabric. LISUN sets the needle spacing and diameter.
Bars come in four standard effective widths. The effective length can be extended by 5–20mm and the overall length by 50–150mm to suit a particular line, and longer bars can be made to order. The bars are normally mounted in an ESD-RACK frame.
| Model | Effective length | Actual length |
|---|---|---|
| ESD-BAR800 | 800mm | 900mm |
| ESD-BAR1200 | 1200mm | 1300mm |
| ESD-BAR1600 | 1600mm | 1700mm |
| ESD-BAR2000 | 2000mm | 2100mm |
Needles: tungsten. Power: ESD-RPB30KV or ESD-RPB60KV high-voltage DC supply.
An ESD-RPB high-voltage DC supply and, normally, an ESD-RACK frame to hold the bar over the fabric.
No. Despite the name, the ESD-BAR is a corona charging bar for meltblown fabric production, not an ESD simulator accessory.