Home /
Environmental Test Equipment

Desktop Vacuum Drying Ovens

Desktop Vacuum Drying Ovens for Low-Temperature Drying of Heat-Sensitive Samples

A vacuum drying oven combines a constant-temperature chamber with negative pressure. Lowering the pressure lowers the boiling point of water and solvents, so moisture leaves the sample well below its normal boiling point: at a few kilopascals water boils at around 30 to 60°C, and these ovens reach 133Pa. The benefit is not a higher temperature but a lower one, in a low-oxygen atmosphere, with faster moisture migration out of the sample.

That makes vacuum drying the right tool for heat-sensitive, oxidisable or decomposable samples, and for materials with complex structures that hold on to moisture: active pharmaceutical ingredients, enzymes, battery electrode materials, nano-powders, PCBs and sensors. Drying at 40 to 80°C keeps active ingredients, pigments and crystal structures intact, and the vacuum draws trapped gas out of powders so they re-absorb less moisture and cake less after drying.

Sonacme's DZF series covers six benchtop sizes from 24L to 252L, all reaching 250°C with ±1°C PID control and an ultimate vacuum of ≤133Pa. The 24L and 30L models heat through the shelf plates for fast warm-up; the larger models wrap the heaters around the chamber walls for more uniform temperature and movable shelves.

Desktop Vacuum Drying Ovens
Inquire About This Range →
Sonacme DZF desktop vacuum drying oven

Desktop Vacuum Drying Ovens (DZF Series)

Benchtop vacuum ovens for gentle, low-temperature drying of heat-sensitive and oxidisable samples, six sizes from 24L to 252L.
Enquire About This Series →

Technical Specifications

Temperature rangeRT+10°C to 250°C
Temperature fluctuation±1°C
Temperature resolution0.1°C
Temperature controlMicrocomputer PID controller with large LCD (set temperature, actual temperature, running time)
Vacuum level≤133Pa (-0.1MPa)
Vacuum gaugeMechanical analogue gauge
Inner chamberOne-piece 304 stainless steel, rounded corners
DoorDouble-layer tempered glass viewing window, one-piece silicone gasket with latch clamping
Timer1 to 9999 min
Power supply220V AC, 50Hz
Vacuum pumpOptional, sold separately (oil-free or rotary vane)

Which model do I need?

Every model reaches 250°C and ≤133Pa with the same ±1°C control, so choose by chamber size for your largest vessel or tray load. The 24L and 30L models use plate-insert heating for fast warm-up; 52L and larger use strap-on heating for more uniform temperature and movable shelves. Click a model for its full specifications.

ModelVolumeInner W×D×H (mm)External W×D×H (mm)HeatingShelvesPower
DZF 451824L300×300×275615×470×470Plate-insert1450W
DZF 451930L320×320×300635×490×495Plate-insert1450W
DZF 452052L415×370×345830×640×540Strap-on21200W
DZF 452191L450×450×450615×660×840Strap-on21400W
DZF 4522125L500×500×500665×720×890Strap-on22000W
DZF 4523252L600×600×700900×660×860Strap-on44000W

Model specifications

24L

DZF 4518 Vacuum Drying Oven

Volume24L
Inner size (W×D×H)300×300×275mm
External size (W×D×H)615×470×470mm
Heating methodPlate-insert heating
Shelves1
Input power450W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4518 →
30L

DZF 4519 Vacuum Drying Oven

Volume30L
Inner size (W×D×H)320×320×300mm
External size (W×D×H)635×490×495mm
Heating methodPlate-insert heating
Shelves1
Input power450W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4519 →
52L

DZF 4520 Vacuum Drying Oven

Volume52L
Inner size (W×D×H)415×370×345mm
External size (W×D×H)830×640×540mm
Heating methodStrap-on heating
Shelves2
Input power1200W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4520 →
91L

DZF 4521 Vacuum Drying Oven

Volume91L
Inner size (W×D×H)450×450×450mm
External size (W×D×H)615×660×840mm
Heating methodStrap-on heating
Shelves2
Input power1400W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4521 →
125L

DZF 4522 Vacuum Drying Oven

Volume125L
Inner size (W×D×H)500×500×500mm
External size (W×D×H)665×720×890mm
Heating methodStrap-on heating
Shelves2
Input power2000W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4522 →
252L

DZF 4523 Vacuum Drying Oven

Volume252L
Inner size (W×D×H)600×600×700mm
External size (W×D×H)900×660×860mm
Heating methodStrap-on heating
Shelves4
Input power4000W
Temperature / vacuumRT+10 to 250°C, ±1°C; ≤133Pa
Enquire about DZF 4523 →

Applications

  • Chemical and new materials: low-temperature drying and degassing of nano-powders, catalysts, resins and lithium battery electrode materials
  • Biology and pharmaceuticals: drying and constant-weight processing of enzymes, strains, vaccines, intermediates and APIs
  • Electronics and semiconductors: pre-treatment, vacuum impregnation, defoaming, drying-loss tests, and baking out moisture from PCBs, components, sensors and optical lenses
  • Food and agriculture: low-temperature drying and moisture-content pre-processing
  • Environmental testing: drying and constant-weight treatment of soil, sludge and filter membranes
  • Research and teaching laboratories
Frequently Asked Questions
Why dry under vacuum instead of in a forced-air oven?
Lowering the pressure lowers the boiling point: at a few kilopascals water boils at around 30 to 60°C, and the DZF ovens pull down to 133Pa, well below that. Samples dry faster at 40 to 80°C, in an almost oxygen-free chamber, so heat-sensitive, oxidisable or decomposable materials keep their activity, colour and structure, and trapped gas is drawn out of powders so they cake less.
What is the difference between plate-insert and strap-on heating?
The 24L and 30L models heat through the shelf plates inside the chamber, which conducts heat straight into the sample and warms up quickly. The 52L to 252L models wrap the heaters around the outer walls of the chamber, which gives more uniform temperature and lets you move the shelves to fit taller vessels.
Is a vacuum pump included?
No, the pump is ordered separately. Choose an oil-free pump for clean, maintenance-free operation with no oil mist, or a rotary vane pump for a higher ultimate vacuum and faster pump-down in the larger chambers. Drying canisters and an inert-gas inlet are also available.
Send an Enquiry →Send an Enquiry →

Related Reading

Read: Vacuum Drying Ovens — Why Lower Pressure Means Gentler, Faster Drying